Kenwood KDV-U4349 - Manual (Page 7)

English | 7
For first use
Language Setup
Set a language used for screen display, DVD subtitles,
etc.
• “LANGUAGE” item of the Setup menu (page 13)
DSP Setup
To get clear sound, set the sound environment
according to the location and size of physically
installed speakers with reference to the followings:
• “MENU” > “SWPRE” of <Function Control> (page 10)
• Cabin selection (page 27)
• Speaker Setting (page 27)
• DTA (Digital Time Alignment) setting (page 28)
• X’Over setting (page 28)
⁄
• Setting “DSP SET” to “BYPASS” disables the settings related
to the DSP function. Refer to “DSP” > “DSP SET” of <Function
Control> (page 11).
Before using this unit for the first
time
Demonstration mode setting
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
Demonstration mode setting.
Display Setting
“DEMO ON” The Demonstration mode function is ON.
“DEMO OFF” Cancel Demonstration mode (Normal mode).
TV system selection
You must select the appropriate system mode for
your TV system. When the selected system does not
coincide with the system of your TV, normal color
picture may not be displayed.
Display Setting
“P/N PAL” Select when the unit is connected with PAL-TV.
“P/N NTSC” Select when the unit is connected with NTSC-TV.
1 Select Standby
Press the [SRC] button.
Select the “STANDBY” display.
2 Enter Function Control mode
Press the [ ] button for at least 1 second.
“FUNCTION” is displayed.
3 Enter Menu mode
Turn the [AUD] knob to select “MENU”.
Press the [AUD] knob.
4 Set the Demonstration mode
Turn the [AUD] knob to select “DEMO”.
Press the [AUD] knob for at least 2 seconds.
Select the “DEMO OFF” display.
5 Set the TV system
Turn the [AUD] knob to select “P/N”.
Press the [
4] or [¢] button.
6 Exit Function Control mode
Press the [ ] button for at least 1 second.
7 Turning OFF the Power
Press the [SRC] button for at least 1 second.
⁄
• These settings can be changed later.
$AA/A'PINKUJKPFF