Audio adjustments – Kenwood KDV-MP5343U User Manual
Page 28
28
|
KDV-MP5343U/ KDV-MP5443U/ KDV-MP4343/ KDV-MP4443
DTA (Digital Time Alignment) Setting
Adjusting fine tuning of the speaker position
compensation value specified at <Cabin selection>
(page 27).
1
Enter DTA setting mode
Press [
]
1 sec.
, and select “DSP”
>
“SETUP”
>
“DTA”.
Press the [AUD] knob.
• For how to select Function Control items, refer to
<Function Control> (page 10).
2
Select the speaker you want to set
Turn the [AUD] knob and push the center.
“FRONT” (Front speaker)/ “REAR” (Rear speaker)/
“SUB-W” (Subwoofer )
3
Set the compensation value of the speaker
position
Turn the [AUD] knob and push the center when
the desired value is displayed.
Adjust between 0 and 440 cm.
Refer to
✍
<Appendix> (page 31) on how to set
the compensation value.
4
Exit DTA setting mode
Press the [
] button.
X’Over Setting
You can set a X’Over value for the speakers;
Setting item
Range
Front High Pass Filter
“FRONT”
>
“FC”
Rear High Pass Filter
“REAR”
>
“FC”
“THRU” (Through)/ 30/ 40 / 50/
60/ 70/ 80/ 90/ 100/ 120/ 150/
180/ 220/ 250 Hz
Front High Pass Slope
“FRONT”
>
“SLOPE”
Rear High Pass Slope
“REAR”
>
“SLOPE”
-6/ -12/ -18/ -24 dB/Oct.
Subwoofer Low Pass Filter
“SUB-W”
>
“FC”
30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/
120/ 150/ 180/ 220/ 250 Hz/
“THRU” (Through)
Subwoofer Low Pass Slope
“SUB-W”
>
“SLOPE”
-6/ -12/ -18/ -24 dB/Oct.
Subwoofer Phase
“SUB-W”
>
“PHASE”
REVERSE (180°)/ NORMAL (0°)
1
Enter X’Over setting mode
Press [
]
1 sec.
, and select “DSP”
>
“SETUP”
>
“X’OVER”.
Press the [AUD] knob.
• For how to select Function Control items, refer to
<Function Control> (page 10).
2
Select the speaker you want to set
Turn the [AUD] knob and push the center.
“FRONT”/ “REAR”/ “SUB-W”
3
Select the item you want to set
Turn the [AUD] knob and push the center.
4
Set the X’Over value
Turn the [AUD] knob and push the center when
the desired value is displayed.
5
Exit X’Over setting mode
Press the [
] button twice.
Audio Adjustments
B64-4430-00_00_M_English.indd 28
B64-4430-00_00_M_English.indd 28
09.2.13 10:19:20 AM
09.2.13 10:19:20 AM