Kenwood TH-D72A - Manual (Page 44)

35
OPTIONS
The following options are available for use with this transceiver:
• PB-45L Li-ion battery pack
• BT-15 Battery case
• KSC-32 Rapid charger
• SMC-32 Speaker microphone
• SMC-33 Speaker microphone
• EMC-3 Clip microphone with
earphone
• HMC-3(G) Headset
• KHS-21 Headset
• KHS-29F Headset
• EMC-7 Clip microphone
• PG-3J Cigarette lighter cord
• PG-2W DC cable
• PS-60 DC Power Supply
Note: Optional accessories for use with this transceiver may change, post-production. (New
options may become available and/or current options may be discontinued.) Please refer to the
options catalog(s) for applicable transceivers.
0(025<&21752/352*5$00&3$
The following functions can be set only by using the MCP-4A software:
• Power on password value
• Bitmap setting of the Power ON graphic
Using the MCP-4A software, you can:
• View memory channel groups
• Save/load settings
• Read exported TravelPlus for Repeaters TM files issued from the ARRL TM
(There are some version restrictions; refer to the help text of the MCP-4A.)
• Export memory and various settings in html
(TravelPlus for Repeaters is a trademark of ARRL.)
To download the MCP-4A software, go to:
http://www.kenwood.com/i/products/info/amateur/software_download.html
Note: This URL may change without notice.
8VLQJWKH0&3$6RIWZDUH
1 Follow the directions of the installer to install the software.
2 Set up the PC COM port.
3 The transceiver data is read from the MCP-4A software.
4 Select your desired settings, then write the data to the transceiver.