Kenwood TK-2312/3312 - Manual (Page 2)

ADS#57711 Printed in USA
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete list of all accessories and options.
Model TK-2312 TK-3312
GENERAL
Frequency Range
Type 1 136-174 MHz 450-520 MHz
Type 2 - 400-470 MHz
Number of Channels
Zone/Channel Max. 128 per Radio / Max. 128 per Zone
Channel Spacing
Wide/Narrow 25 kHz / 12.5 kHz
Battery Voltage 7.5V DC±20%
Battery Life (5-5-90 duty cycle, during hi-power, battery saver off)
with KNB-45L (2,000mAh) Approx. 12 hours
Operating Temperature Range -22°F ~ +140°F (-30°C ~ +60°C)
Frequency Stability
±2.5ppm (-22°F ~ +140°F)
Antenna Impedance 50 Ω
Channel Frequency Spread
Type 1 38 MHz 70 MHz
Type 2 - 70 MHz
Dimensions (W x H x D), Projections not Included
Radio Only 2.13” x 4.8” x 0.83” (54 x 122 x 21.1 mm)
with KNB-45L 2.13” x 4.8” x 1.33” (54 x 122 x 33.7 mm)
Weight (net)
Radio Only 6.3 oz (180 g)
with KNB-45L 10.6 oz (300 g)
FCC ID
Type 1 ALH413700 Pending
Type 2 - ALH413801
IC Certification
Type 1 282D-413700 -
Type 2 - 282D-413801
Model TK-2312 TK-3312
RECEIVER (Measurements made per TIA/EIA-603)
Sensitivity (12dB SINAD)
Wide 0.25 µV
Narrow 0.28 µV
Selectivity
Wide 70 dB
Narrow 60 dB
Intermodulation Distortion
Wide 70 dB
Narrow 60 dB
Spurious Response 70 dB 70 dB
Audio Distortion Less than 5%
Audio Output 500 mW / 8 Ω
TRANSMITTER (Measurements made per TIA/EIA-603)
RF Output Power
High 5 W 5 W
Low 1 W 1 W
Spurious Response 70 dB
Type of Emission
Wide 16KØF3E
Narrow 11KØF3E
FM Hum & Noise
Wide 45 dB
Narrow 40 dB
Audio Distortion Less than 5%
Specifications are subject to change without notice, due to advancements in technology.
Windows ® is a registered trademark of Microsoft Corporation in the United States and other countries.
FleetSync ® is a registered trademark of JVC KENWOOD Corporation in the United States and/or other countries.
All other trademarks are property of their respective owners.
Options
Specifications
■ KNB-45L
Li-Ion Battery Pack
(2000 mAh)
■ KSC-35K
Fast Charger (3-Hour)
■ KRA-22
VHF Low Profile
Helical Antenna
■ KRA-23
UHF Low Profile
Helical Antenna
■ KRA-26
VHF Helical Antenna
■ KRA-27
UHF Whip Antenna
■ KMC-45
Speaker Microphone
■ KMC-21
Compact Speaker
Microphone
■ KMC-48GPS
GPS Speaker
Microphone
■ KEP-2
Earphone Kit
(2.5mm plug)
■ KHS-7
Single-Muff Headset
■ KHS-7A
Single-Muff Headset
with In-line PTT
■ KHS-8BL/BE
2-wire Palm Mic with
Earphone (Black/Beige)
■ KHS-9BL/BE
3-wire Lapel Mic
with Earphone (Black/Beige)
■ KHS-22
Behind-the-head
Headset with PTT
■ KHS-23
2-wire Palm Mic
■ KHS-25
D-Ring Ear Hanger
with PTT & Boom Mic
■ KHS-26
Earbud In-line
PTT Headset
■ KHS-27
D-Ring In-line
PTT Headset
■ KMB-25
Six Unit Charger
Adapter
■ KMB-28
Six Unit Charger
Adapter for six
KSC-35K chargers
■ KBH-10
Belt Clip
■ KWR-1
Water Resistance Bag
(chargers not included)
(chargers not included)
Footnotes from front:
1 Conventional Zones: 128 Channels /128 Zones max. per
radio; 128 CH max. per Zone.
2 Two-Tone Decode (3 sets x 2 pairs each); Single / Two-Tone
Encode (10 tones), Operator Selectable Tone (40 QT.DQT
code pairs).
3 DTMF Encode: PTT ID, Emergency ANI, Auto-Dial
(16 numbers); DTMF Decode: Code Squelch (3-10 digit),
Selective Call (9-digit with status) Group Codes A,B, C, D &
Wild Card characters) and Radio Stun.
4 Special Alert Tone Patterns operate for 2-Tone, DTMF,
FleetSync
® selective call decode.
5 Call Key 1, 2, & 3: operates for 2-Tone, DTMF and
FleetSync
® status encode.
6 KPG-134D required: Windows ® XP/Vista/7 compatible;
English/Spanish/French screen languages.
7 ID List capacity is 100 ID's; Short Text Messages are radio
stored & LCD displayed; Status Message List capacity is 50.
Standard MIL 810C MIL 810D MIL 810E MIL 810F MIL 810G
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II 500.5/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II 501.5/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II 502.5/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II 503.5/Procedure I
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I 505.5/Procedure I
Rain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III 506.5/Procedure I, III
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4 507.5/Procedure II
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4 509.5
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III 510.5/Procedure I
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I 514.6/Procedure I
Shock 516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV 516.5/Procedure I, IV 516.6/Procedure I, IV
International Protection Standard
Dust & Water Protection IP54/55
Applicable MIL-STD & IP
*To meet IP 54/55, the 2-pin connector cover has to be connected on the radio or the locking bracket has to be attached to the KMC-45 speaker mirophone.