Kenwood TK-190 - Manual (Page 23)

18
■ Revert Channel
The revert channel is the channel your transceiver
changes to when you press the PTT switch to
transmit during Scan.
Your dealer can program the type of revert channel
to be used by your transceiver from the following
choices:
• Last Called (Default): Changes back to the last
channel you received a call on, even if scanning has
resumed.
• Last Used: Changes back to the last channel you
transmitted on. However, if you press the PTT switch
while you are on a different channel, but you are
receiving on that channel and scanning has not yet
resumed, you will transmit on the new channel.
• Selected & Talk Back: Changes back to the channel
you selected before beginning scanning. However, if
you press the PTT switch while you are on a different
channel, but you are receiving on that channel and
scanning has not yet resumed, you will transmit on the
new channel.
• Selected: Changes back to the channel you selected
before beginning scanning.
• Priority & Talk Back: Changes back to the priority
channel. However, if you press the PTT switch while
you are on a different channel, but you are receiving on
that channel and scanning has not yet resumed, you
will transmit on the new channel.
• Priority: Changes back to the priority channel.