Kenwood KDC-X798 - Manual (Page 25)

25
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Part list for installation
(A) Faceplate
Wiring connection
Fuse (10 A)
To the optional SiriusXM Vehicle Tuner
(commercially available) ( 11)
Rear/ front/ subwoofer output
Antenna terminal
Car fuse box
Car fuse box
Battery
Ignition switch
Blue/White
(Power control wire)
Light blue/yellow
(Steering remote
control wire)
Red
(Ignition wire)
Yellow
(Battery wire)
Black (Ground wire)
To the metallic body or chassis
of the car
To the power control terminal when using
the optional power amplifier, or to the
antenna control terminal in the vehicle.
Brown
(Mute control wire)
Blue
(Antenna control
wire)
White
Gray
Green
Purple
White/Black
Gray/Black
Green/Black
Purple/Black
To connect the Kenwood navigation system,
refer your navigations manual.
To front speaker (left)
To rear speaker (left)
To front speaker (right)
To rear speaker (right)
(Not used)
To the steering wheel remote control
adapter
(C) Mounting sleeve
(B) Trim plate
(D) Wiring harness
(E) Extraction key
MIC (Microphone input terminal) ( 13)
USB cable (for KDC-X798 )
If no connections are made, do not let the wire
come out from the tab.
JS_KWD_KDC_X798_KWK0_04_EN.indd 25 JS_KWD_KDC_X798_KWK0_04_EN.indd 25 18/12/2013 10:29:16 PM 18/12/2013 10:29:16 PM