Enhanced operating ease, External terminals, Built-in automatic antenna tuner (ts-480sat) – Kenwood TS-480HX/480SAT User Manual

Page 6: Emphasis on portability, Separate lcd control panel with speaker, Af filters, Tx filter, Speech processor, Cw auto tune

Advertising
background image

External terminals

ENHANCED OPERATING EASE

ENHANCED OPERATING EASE

Built-in automatic antenna tuner

(TS-480SAT)

The automatic antenna
tuner inside the
TS-480SAT — with
presets for quick band
changes — covers all
amateur bands 1.8MHz
to 54MHz.

Emphasis on portability

Outdoor use is facilitated by DC 13.8V operation and com-
pact dimensions: the 7.05lbs. (3.2kg) main unit measures
7-1/16" x 2-3/8" x 10-3/16" (179 X 61 X 258 mm)(W X
H X D)*, while the 1.1lbs. (0.5kg) control panel is 7-1/16"
x 2-15/16" x 1-7/16" (180 X 75 X 37 mm)(W X H X D)*

*Projections not included.

Separate LCD control panel with speaker

The large, standalone LCD control panel — featuring its
own 2-5/8" (6.6cm) speaker (2W max. output) — can be
freely positioned up to13 feet (4 meters) from the main
unit. The supplied tabletop panel bracket is convenient
when using the transceiver
at home on a desk, while
the mobile panel bracket is
ideal for mounting in a car.
The panel can be snapped
into place or removed
from a bracket instantly.
It also features 34 keys,
each with backlighting to
enhance operating ease.

AF filters

Slope tune can be used to move the target signal
away from noise using hi-cut and low-cut filters (SSB,
FM and AM), while Width allows adjustment of the
pass-band to avoid adjacent noise (CW/FSK).

TX filter

Audio quality during transmit can be adjusted to suit by
switching between two passband settings (500-2500Hz
and the default 300-2700Hz).

Speech processor

Available for SSB, FM and AM transmission, the speech
processor enhances the clarity of messages for the
receiving station. Input/output levels can be finely
adjusted (0~100).

CW auto tune

This feature uses DSP to automatically zero in on a
target frequency during CW operations. It is also RIT
compatible.

Slope Tune

Width

Microphone

(8-pin modular)

Paddle

(1/8" or 3.5 mm dia.)

Ext. speaker

(1/8" or

3.5 mm dia.)

Control panel

(6-pin modular)

Key

(1/8" or 3.5 mm dia.)

Data

(6-pin mini DIN)

Linear amp remote

(8-pin mini DIN)

RS-232C for PC

or split operations

(9-pin DSUB)

Main unit (front)

Ground

ANT1

ANT2

DC2

(TS-480HX only)

Ext. antenna tuner

Main unit (rear)*

DC1

Target signal

LOW cut

HI cut

Width

Target signal

*The TS-480SAT is equipped with a single fan.

Advertising