Kenwood TK-7302V/8302U - Manual (Page 2)

■ KMC-35
Microphone
(Supplied)
■ KMC-36
Microphone
with Keypad
■ KMC-9C
Desktop Microphone
■ KES-3
External Speaker
■ KES-5
External Speaker
(requires KCT-60 option)
■ KMB-10
Key Lock Adapter
■ KLF-2
Line Filter
■ KCT-18
Ignition Sense Cable
(requires KCT-60 option)
■ KCT-36
3m Extension Cable
(for KCT-60)
■ KCT-60
DB 15-to-15 Pin
Molex Adaptor Cable
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete list of all accessories and options.
Model TK-7302V TK-7302HV TK-8302U TK-8302HU
GENERAL
Frequency Range
136-174 MHz 450-520 MHz
Number of Channels
Zone 2
Channel Max. 16
Channel Spacing 25 kHz/12.5 kHz
Operating Voltage 13.6V DC±15%
Current Drain
Standby 0.4 A
Receive 1.0 A
Transmit 8.0 A 14.0 A 8.0 A 14.0 A
Operating Temperature Range -22°F ~ +140°F (-30°C ~ +60°C)
Frequency Stability ±2.5 ppm (-30°C ~ +60°C)
Antenna Impedance 50 Ω
Dimensions (W x H x D)
Projections not included
6.3” x 1.7” x 5.4” (160 x 43 x 137 mm)
Weight (Net) 41.6oz (1,180g)
FCC ID K44407600 K44407601 K44407700 K44407702
Model TK-7302V TK-7302HV TK-8302U TK-8302HU
RECEIVER (Measurements made per TIA/EIA-603)
Sensitivity (12dB SINAD)
Wide 0.28 µV
Narrow 0.35 µV
Selectivity
Wide 75 dB
Narrow 65 dB
Intermodulation Distortion
Wide 70 dB
Narrow 60 dB
Spurious Response 75 dB
Audio Output (4 Ω Impedance) 4 W with less than 5% distortion
TRANSMITTER (Measurements made per TIA/EIA-603)
RF Power Output
5 W ~ 25 W 5 W ~ 50 W 5 W ~ 25 W 5 W ~ 45 W* 1
Spurious Response 70 dB
Type of Emission
Wide 16KØF3E
Narrow 11KØF3E
FM Hum & Noise
Wide 45 dB
Narrow 40 dB
Microphone Impedance 600 Ω
Audio Distortion Less than 5%
Options
Specifications
Standard MIL 810C MIL 810D MIL 810E MIL 810F
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Rain* 2 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4
Salt Fog* 2 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
Dust* 2 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V
International Protection Standard
Dust & Water Protection* 2 IP54
*2: These MIL-STD and IP54 compliance categories require a KMC-35/36 microphone to be connected; the DB-15 connector to have supplied cover installed and KCT-xx cables or external speakers installed.
*1: 490 ~ 512 MHz: 5 ~ 40 W, 512 ~ 520 MHz: 5 ~ 35 W
Applicable MIL-STD & IP
ADS#28012 Printed in USA
Options
Specifications are subject to change without notice, due to advancements in technology.
FleetSync ® is a registered trademark of JVC KENWOOD Corporation in the United States and/or other countries.
Windows ® is a registered trademark of Microsoft Corporation in the United States and other countries.
All other trademarks are property of their respective owners.