Kenwood KDC-X498 - Manual (Page 4)

4
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED
Set the initial settings
1 Press B SRC to enter STANDBY.
2 Press the volume knob to enter [FUNCTION].
3 Turn the volume knob to make a selection (see the following table), then press
the knob.
4 Press and hold to exit.
To return to the previous setting item or hierarchy, press .
Default: XX
AUDIO CONTROL
SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches,
6×9 inches or 6 inches) or OEM speakers for optimum performance.
DISPLAY
EASY MENU ON: Both display and button illumination change to white color when entering
[FUNCTION]. ; OFF: Both display and button illumination remain as [COLOR SELECT]
color. ( 12)
TUNER SETTING
PRESET TYPE NORMAL: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/
AM). ; MIX: Memorizes one station for each preset button, regardless of the selected band.
SYSTEM
KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
SOURCE SELECT
PANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables. ( 9)
IHEART SRC ON: Enables IHEARTRADIO in source selection. ; OFF: Disables. ( 10)
BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 9)
CD READ 1: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as
an music CD. No sound can be heard if an audio file disc is played.
F/W UPDATE
UPDATE SYSTEM
F/W UP
xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
3
Cancel the demonstration
When you turn on the power (or after you reset the
unit), the display shows: “CANCEL DEMO” “PRESS”
“VOLUME KNOB”
1 Press the volume knob.
[YES] is selected for the initial setup.
2 Press the volume knob again.
“DEMO OFF”
appears.
Set the clock
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [CLOCK], then press the
knob.
3 Turn the volume knob to select [CLOCK ADJUST], then
press the knob.
4 Turn the volume knob to make the settings, then press
the knob.
Day Hour Minute
5 Turn the volume knob to select [CLOCK FORMAT], then
press the knob.
6 Turn the volume knob to select [12H] or [24H], then press
the knob.
7 Press and hold to exit.
To return to the previous setting item or hierarchy, press
.
1
2
EN_KDC_X498_KWK0_f.indd 4 EN_KDC_X498_KWK0_f.indd 4 10/10/2013 2:54:06 PM 10/10/2013 2:54:06 PM