Kenwood KDC-X8019BT - Manual (Page 15)

English | 15
3 way speaker system setup
Woofer output
2-Way/3-Way Crossover Setting
Select a crossover mode 2-way or 3-way
according to how the speakers are
connected.
1
Press the [SRC] button to select
“STANDBY”.
2
Pressing down the[MENU] and [PRESET]
buttons for at least 3 seconds, allows
you to enter the 2-way/3-way crossover
setting mode.
3
The currently selected crossover mode is
displayed.
To change it, turn the [VOL] knob to
select “YES”, and then press the [VOL]
knob.
4
A confirmation screen appears.
If you are sure you want to change the
crossover mode, turn the [VOL] knob
to select “YES”, and then press the [VOL]
knob.
5
The newly selected crossover mode is
displayed, canceling the 2-way/3-way
crossover setting mode.
B59-2091-00_00_FLIPQSG_M_EN.indd 15 11/12/28 12:03