Kenwood KDC-X8019BT - Manual (Page 17)

Peel off the release coated
paper of double-face adhe-
sive tape to secure the
microphone on the place
shown above.
Turn the microphone
toward the driver.
Fix a cable with a commercial item of tape.
Accessory 5
Appendix
About Audio file
• Playable Audio files
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)
• Playable disc media
CD-R/RW/ROM
• Playable disc file formats
ISO 9660 Level 1/2, Joliet, Romeo, Long
file name.
• Playable USB devices
USB mass storage class
• Playable USB device or SD card file system
FAT16, FAT32
The online manual about
audio files is put on the site,
www.kenwood.com/cs/ce/audiofile/.
iPod/iPhone that can be connected
to this unit
Made for
• iPod touch (4th generation)
• iPod touch (3rd generation)
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPod classic
• iPod with video
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• iPod nano (1st generation)
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
For information on the compatibility with
iPod/iPhone software, visit www.kenwood.
com/cs/ce/ipod/.
English | 17
Installing the
Microphone unit
1. Check the installation position of the
microphone (accessory 5).
2. Remove oil and other dirt from the
installation surface.
3. Install the microphone.
4. Wire the cable up to the unit with it
secured at several positions using tape or
the like.
⁄
• Install the microphone as far as possible
from the cell-phone.
B59-2091-00_00_FLIPQSG_M_EN.indd 17 11/12/28 12:03