Care and cleaning, Changing the basic settings – Siemens ET475MU11E User Manual
Page 40
40
Care and cleaning
Do not use high-pressure or steam jet cleaning
devices.
Caution, risk of burns! Wait until the residual heat
ṇ
display has gone out before cleaning the grill.
Clean the grill after every use. Burnt in residues may
be difficult to remove.
Draining the water
In the event that the water is still hot when drained,
add some cold water to the container to cool it!
To drain the water, place a heat-resistant container
beneath the drain valve. Open the drain tap by
turning the lever down by 90°. Then close the tap by
turning the lever fully up.
Changing the basic
settings
The grill must be switched off.
1.
Switch on the grill.
2.
Within the next 10 seconds, touch the
W
symbol
for 4 seconds.
c2
appears on the left-hand
display and
2
on the right-hand display.
3.
Touch the
W
symbol repeatedly until the desired
symbol appears on the left-hand display
4.
Set the desired value on the control panel.
5.
Touch the
W
symbol for 4 seconds.
The setting is stored.
Switching off without storing To exit the basic setting, switch off the grill with the
the settings
main switch. The changes of the settings will not
be saved.