Siemens KI28VA20FF - Manual (Page 26)

en
26
Controls
Fig. 2
Switching
the appliance on
Switch on the appliance with the main
On/Off switch. Fig. 2/1
The temperature display, Fig. 2/3,
flashes until the appliance has reached
the set temperature.
The appliance starts to cool, the light is
switched on when the door is open.
When the appliance has been switched
on, it may take several hours until the set
temperature has been reached. Do not
put any food in the appliance
beforehand.
Operating tips
The refrigerator compartment
temperature rises:
■ if the appliance door is opened
frequently,
■ if large quantities of food are placed in
the refrigerator compartment,
■ if the ambient temperature is high.
Setting
the temperature
Fig. 2
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
Keep pressing temperature selection
button 2 until the required refrigerator
compartment temperature is set. The
value last selected is stored.
The set temperature is indicated on
display 3.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Perishable food should not be stored
above +4 °C.
Freezer compartment
The temperature in the freezer
compartment depends on
the temperature in the refrigerator
compartment.
Lower temperatures in the refrigerator
compartment also cause lower
temperatures in the freezer
compartment.
1 Main On/Off switch
Serves to switch the whole
appliance on and off.
2 Temperature selection button
Press this button to set the
temperature.
3 Temperature display refrigerator
compartment
The numbers next
to the temperature display lights
correspond to refrigerator
compartment temperatures in °C.
The lit lamp indicates
the selected temperature.
4 “super” button
For switching on the Super
cooling (refrigerator
compartment) function or Super
freezing (freezer compartment)
function.
See chapter entitled “Super
cooling” or “Super freezing”.