Observe room temperature, Switching on the appliance, Ventilation – Siemens KI40FP60 User Manual

Page 26: Operating tips

Advertising
background image

26

Observe room
temperature

The appliance is designed for a specific
climatic class. Irrespective of the climatic
class, the appliance can be operated at
the following room temperatures.

The climatic class can be found on the
rating plate at the bottom leftĆhand side
in the appliance.

Climatic class

Ambient temperature

SN

+10

°C to 32 °C

N

+16

°C to 32 °C

ST

+16

°C to 38 °C

T

+16

°C to 43 °C

Ventilation

Fig. 1/20
Conduction of the heated air must not be
obstructed. Otherwise, the refrigerating
unit must work harder. This increases
power consumption.
Therefore: Never cover or block ventilation
opening!

Switching on
the appliance

Switch on the appliance with the main
switch. Fig. 1/6

The temperature display flashes, Fig. 2/4,
until the appliance has reached the set
temperature.

Interior light in refrigerator compartment
is switched on when the door is open.

Operating tips

S The temperature in the freezer compartĆ

ment depends on the temperature
in the refrigerator compartment.
Warmer refrigerator compartment
temperatures also cause warmer freezer
compartment temperatures.

S While the refrigerating unit is running,

beads of water or hoarfrost form at the
back of the refrigerator compartment.
This is quite normal. It is not necessary
to scrape off the frost or wipe off the
beads of water. The rear panel defrosts
automatically. The condensation flows
into the evaporation area of the
appliance via the condensation
channels and the drainage hole.

en

Advertising
This manual is related to the following products: