Kenwood KDC-314AM - Manual (Page 4)

4 | KDC-3047/ KDC-3047GY/ KDC-3047M/ KDC-3247/ KDC-3347/ KDC-314
Basic Operations
Before Using
Exit of the Demonstration Mode
Turn off the demonstration mode when you use it
for the first time after installation.
1 Press the [VOL] knob to quit the demonstration
mode when the messages “CANCEL DEMO”,
“PRESS”, “VOLUME KNOB” are displayed (approx.
15 seconds).
2 Select “YES” and press the [VOL] knob.
When “NO” is selected, turn the [VOL] knob.
⁄
• Demonstration mode can also be cancelled in “DEMO
MODE” of <Function Setting> (page 8).
Adjusting the Clock
1 Press the [DISP] button several times until clock
display (“CLOCK”) appears.
2 Keep pressing the [DISP] button until the hour
display blinks.
3 Turn the [VOL] knob to adjust the hour.
4 Press the [VOL] knob to finish the hour adjusting.
The minute display blinks.
5 Turn the [VOL] knob to adjust the minute.
6 Press the [VOL] knob to finish the minute
adjusting.
⁄
• You can do this adjustment when “TIME SYNC” in <Function
Setting> (page 8) is set to “OFF”.
Common Operation
Power and source select
Turns the power ON by pressing the [SRC]
button.
When power is ON, pressing the [SRC] button
switches among playable sources in the following
order:
Tuner (“TUNER”)
➜ CD (“CD”) ➜ Auxiliary
Input (“AUX”) ➜ Standby (“STANDBY”) ➜ Tuner
(“TUNER”)
Keeping pressing the [SRC] button for at least 1
second turns the power OFF.
⁄
• The source “CD” can be selected when each source is ready
to play.
Volume
Turning the [VOL] knob adjusts the sound
volume.
Clock display and Display scroll
Pressing the [DISP] button selects the display
mode.
Refer to <Text Display Selection> (page 7).
Keeping pressing the [DISP] button scrolls the
display.
Auxiliary input
Portable audio device can be connected with the
stereo mini-plug (3.5 mm ø).
[BAND] [VOL] [1][2] [3][4] [5][6] [ ] [D]
[
] [DISP] [SRC] [ ]
[ ]
Release
Auxiliary input
Disc slot
B64-4591-00_00_en.indd 4 09.10.8 10:54:04 AM