Kenwood KDC-314AM - Manual (Page 8)

8 | KDC-3047/ KDC-3047GY/ KDC-3047M/ KDC-3247/ KDC-3347/ KDC-314
Function Setting
Perform configuration for this unit. You can set up
the following functions.
1 Select a source
Press the [SRC] button.
Items to be displayed vary depending on the selected
source. Refer to the function list shown later.
2 Enter Function Setting mode
Press the [VOL] knob.
“FUNCTION” is displayed.
3 Select the Function item
Turn the [VOL] knob to display your desired item,
and then press the [VOL] knob.
Repeat the above operation to select the
function item to set.
Pressing the [
] button allows you to go back
to the previous item.
4 Set the Function item
Turn the [VOL] knob to select your desired setting,
and then press the [VOL] knob.
5 Exit Function Setting mode
Press the [ ] button for at least 1 second.
Function item
Legend :
No. Function name: “Function name displayed on
this unit”
➤ “
Setting 1”*, “Setting 2”...
The function related to the selected function item is
described. For where it appears, refer to the No. given in
the function list.
⁄
• The setting marked with * is a factory setting.
• The function marked with *
1 is supported only by the
KDC-3047/ KDC-3047M/ KDC-3247/ KDC-314.
<SETTINGS>
¥ Clock Adjust: “CLOCK ADJ”
Sets the clock
1. Turn the [VOL] knob to adjust the hour.
2. Press the [VOL] knob to finish the hour
adjusting. The minute display blinks.
3. Turn the [VOL] knob to adjust the minute.
4. Press the [VOL] knob to finish the minute
adjusting.
⁄
• You can do this adjustment when “TIME SYNC” is set to
“OFF”.
ø Synchronize the clock: “TIME SYNC” ➤
“ON”*,”OFF”
Synchronizing the RDS station time data and this
unit’s clock.
π Dimmer: “DIMMER SET” ➤ “ON”,”OFF”*
Adjusts the brightness of the display according to
the surrounding illumination.
[ Text Scroll: “TEXT SCROLL” ➤ “AUTO”,
”MANUAL”*
Scrolls the text display of CD, audio file and Radio
text.
“ Local Seek: “LOCAL SEEK” ➤ “ON”,”OFF”*
Only stations whose reception is good are
searched in auto seek tuning. (FM only)
] Seek Mode: “SEEK MODE” ➤
“AUTO1”*,”AUTO2”,”MANUAL”
Selects the tuning mode of the radio.
Tuning mode Display Operation
Auto seek “AUTO1” Automatic search for a station.
Preset station seek “AUTO2” Search in order of the stations in
the Preset memory.
Manual “MANUAL” Normal manual tuning control.
‘ Auto Memory: “AUTO MEMORY”
Memorizes six stations with good reception
automatically.
Selecting “YES” and then pressing the [VOL] knob
starts the auto memory operation.
⁄
• This setting can be made when “TYPE NORM” is selected
for the <Mixed Preset Memory Switching> item
\ Monaural Reception: “MONO SET” ➤
“ON”,”OFF”*
You can reduce the noise when stereo broadcasts
are received as monaural. (FM only)
« News: “NEWS SET” ➤ “OFF”*,”0”-”90”
Automatically receives news bulletin when it
starts. Set the time during which interrupt is to be
disabled after start of another news bulletin.
Changing “NEWS 00M” to “NEWS 90M” turns this
function ON.
If news bulletin starts when this function is ON,
“NEWS” is displayed and news is received. If
“20M” is has been set, reception of another news
bulletin will not start for 20 minutes.
The news bulletin volume is the same level that
was set for Traffic Information.
Å Alternative Frequency: “AF SET” ➤ “ON”*,”OFF”
When the reception is poor, automatically
alternate to another frequency broadcasting the
B64-4591-00_00_en.indd 8 09.10.8 10:54:05 AM