Kenwood CMOS-200 - Manual (Page 12)

12 | CMOS-300/CMOS-200
Overhead View Guideline Adjustment
(Size)
This item adjusts the overall size of the guidelines
displayed in the overhead view.
1 Select “OVERHEAD VIEW GUIDELINE
ADJUSTMENT (Size)”.
2 Press the + or – button of the switch unit to
adjust the size.
3 After completing the adjustment, press the
view button.
Advances to “OVERHEAD VIEW GUIDELINE
ADJUSTMENT (Horizontal direction)”.
Overhead View Guideline Adjustment
(Horizontal Direction)
This item adjusts the left-right positioning of the
guidelines displayed in the overhead view.
1 Select “OVERHEAD VIEW GUIDELINE
ADJUSTMENT (Horizontal direction)”.
2 Press the + or – button of the switch unit to
adjust the left-right positioning.
3 After completing the adjustment, press the
view button.
Advances to “OVERHEAD VIEW GUIDELINE
ADJUSTMENT (Vertical direction)”.
Overhead View Guideline Adjustment
(Vertical Direction)
This item adjusts the overall length of the guidelines
displayed in the overhead view.
1 Select “OVERHEAD VIEW GUIDELINE
ADJUSTMENT (Vertical direction)”.
2 Press the + or – button of the switch unit to
adjust the length.
3 After completing the adjustment, press the
view button.
Advances to “OVERHEAD VIEW GUIDELINE
ADJUSTMENT (Red Line Position Setting)”.
Camera Setting (CMOS-300 only)
$AKPFD