Audio settings – Kenwood KMM-257 User Manual

Page 13

Advertising
background image

11

ENGLISH |

PRESET EQ

NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL: Selects a preset equalizer
suitable to the music genre. (Select [USER] to use the customized bass, middle, and treble
settings.)

BASS BOOST

B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3: Selects your preferred bass boost level. ;
OFF: Cancels.

LOUDNESS

LOUD LV1/ LOUD LV2: Selects your preferred low and high frequencies boost to produce a well-
balanced sound at a low volume level. ; OFF: Cancels.

BALANCE

L15 to R15 (0): Adjusts the left and right speaker output balance.

FADER

R15 to F15 (0): Adjusts the rear and front speaker output balance.

SUB-W SET

ON: Turns on the subwoofer output. ; OFF: Cancels.

DETAIL SET

LPF SUB-W

THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ 160HZ: Audio signals with
frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are sent to the subwoofer.

SUB-W PHASE

REV (180°)/ NORM (0°): Selects the phase of the subwoofer output to be in line with the speaker
output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected
for [LPF SUB-W].)

SUPREME SET

ON: Creates realistic sound by interpolating the high-frequency components that are lost in audio
compression. ; OFF: Cancels. (Selectable only when playing back a USB device.)

VOL OFFSET
(Default: 0)

–8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volume adjustment level of each
source. (Before adjustment, select the source you want to adjust.)

[SUB-W LEVEL]/ [SUB-W SET]/ [LPF SUB-W]/ [SUB-W PHASE] is selectable only if [SWITCH PRE] is set to

[SUB-W]. (➜ 5)

[SUB-W LEVEL]/ [LPF SUB-W]/ [SUB-W PHASE] is selectable only if [SUB-W SET] is set to [ON].

AUDIO SETTINGS

EN_KMM-357SD[EN]3.indd 11

EN_KMM-357SD[EN]3.indd 11

11/27/12 11:52:58 AM

11/27/12 11:52:58 AM

Advertising
This manual is related to the following products: