Kenwood KMM-257 - Manual (Page 18)

16
R L
REAR/SW
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
MUTE
P. CONT
ANT CONT
Wiring connection
Fuse (10 A) Rear/subwoofer output
Antenna terminal
Rear ground terminal
If no connections are made, do not let the wire come out from the tab.
INSTALLATION / CONNECTION
Light blue/yellow
(Steering remote control wire)
To the steering wheel remote control adapter
Blue/White
(Power control wire/ Antenna control wire)
Brown
(Mute control wire)
To the power control terminal when using the
optional power amplifier, or to the antenna control
terminal in the vehicle.
To the terminal that is grounded when either
the telephone rings or during conversation. (To
connect the Kenwood navigation system, consult
your navigation manual.)
Yellow (A4)
Red (Ignition wire)
Red (A7)
Yellow (Battery wire)
ISO connectors
Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall)
automobiles
You may need to modify the wiring of the supplied wiring harness as
illustrated below.
Unit Vehicle
A7 (Red)
Ignition wire
(Red)
A4 (Yellow)
Default wiring
Battery wire
(Yellow)
Pin Color and function Pin Color and function
A4 Yellow Battery B3 Gray ª
Front speaker (right)
A5 Blue/White Power control B4 Gray/black ·
A7 Red Ignition (ACC) B5 White ª
Front speaker (left)
A8 Black Earth (ground) connection B6 White/black ·
B1 Purple ª
Rear speaker (right)
B7 Green ª
Rear speaker (left)
B2 Purple/black · B8 Green/black ·
EN_KMM-357SD[EN]1.indd 16 EN_KMM-357SD[EN]1.indd 16 11/7/12 3:41:48 PM 11/7/12 3:41:48 PM