Asante Technologies FS4008E/FS4016E - Manual (Page 14)

Installation
Page 2-4
◆ Note: The FS4004E does not have a power switch. The
FS4002E is automatically powered on as soon as the power
cord is connected to the FS4004E and to a power outlet.
FS4008E
The front panel of the FS4008E consists of eight 10/100 Mbps ports, one
uplink button switch, and LED indicators. See Figure 2-5.
Figure 2-5 FriendlyNet FS4008E front panel
The back panel of the FS4008E contains a100-240Vac power connector. It also
contains a Ports switch consisting of nine DIP switches. (One of the DIP
switches, marked N/A, is not used.) The DIP switches set the mode of
operation for each port, either Half Duplex or Full NWay.
Figure 2-6 FriendlyNet FS4008E back panel
◆ Note: The FS4008E does not have a power switch. The
FS4008E is automatically powered on as soon as the power
cord is connected to the FS4008E and to a power outlet.
FS4016E
The front panel of the FS4016E contains sixteen 10/100Mbps ports, one
uplink switch button, and LED indicators. See Figure 2-7.
FS4008E FriendlyNet
8-port 10/100 Fast Ethernet Switch
Uplink
or
Power
Switched 10/100Mbps Ports
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
Uplink Port
LEDs Eight 10/100 Ports
(Selector)
115/230V AC Input
1 2 3 4 5 6 7 8 N/A
Port DIP Switches
AC Power Connector