Kenwood TK-3170E6 - Manual (Page 22)

15
OPERATING BASICS
O
VERVIEW
Your dealer can program your transceiver with Conventional,
Voting, Voting with Signaling, and Free Channel Call zones.
The transceiver can handle up to 128 zones with up to 128
channels. Zones, channels, and their functions are
programmed by your dealer.
S
WITCHING
P
OWER
ON/ OFF
Turn the Power switch/ Volume control clockwise to switch
the transceiver ON.
• A beep sounds and the display momentarily lights up.
• If the Transceiver Password function is programmed,
“
” appears on the display. You must enter the
password to unlock the transceiver. Refer to “Transceiver
Password”, below.
Turn the Power switch/ Volume control counterclockwise to
switch the transceiver OFF.
■ T
RANSCEIVER
P
ASSWORD
To enter the password without using the DTMF keypad:
1 Rotate the selector to select a digit.
2 Press the C> key to accept the entered digit and move
to the next digit.
• Press the A key to delete an incorrect character. Press
and hold the A key to delete all entered characters.
3 Repeat steps 1 and 2 to enter the entire password.
4 Press the S key to confirm the password.
• If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.