Kenwood TK-3170E6 User Manual
Page 27
20
P
RIORITY
S
CAN
The Priority channel must be programmed before Priority
Scan can be used. When using Priority Scan, the transceiver
will automatically change to the Priority channel when a signal
is received on that channel, even if a signal is already being
received on a normal channel.
•
The
indicator appears when the Priority channel is selected.
S
CAN
R
EVERT
The Revert zone and channel is the zone and channel which
the transceiver automatically selects when pressing the PTT
switch during Scan. Your dealer can program your
transceiver with 1 of 6 Scan Revert types:
•
Last Called: The last zone and channel on which you received a
call is set as the revert zone and channel.
•
Last Used: The last zone and channel to which you responded
is set as the revert zone and channel.
•
Selected: The last zone and channel you selected is set as the
revert zone and channel.
•
Selected + Talkback: The last zone and channel you selected is
set as the revert zone and channel. However, you can still
transmit on the current channel by pressing the PTT switch.
•
Priority: The Priority channel is the revert channel.
•
Priority + Talkback: The Priority channel is the revert channel.
However, you can still transmit on the current channel by
pressing the PTT switch.