Kenwood KDC-BT53U - Manual (Page 18)

18 | Quick Start Guide
Installing the Digital radio antenna
• When installing the antenna on the
left side
Accessory 5
Accessory 4
Earth sheet
Match the protrusion with 5
8
Remove the film covering the earth
sheet and paste the earth sheet on the
metal part of the vehicle.
Provide sufficient leeway for the earth
sheet so that it does not interfere with
the interior parts (front pillar cover).
Also take care that the interior parts do
not interfere with the amplifier.
Accessory 5
Earth sheet
Interior part
Front pillar
Front glass
9
Wire the antenna cables.
• Use cord clamper (Accessory 6) to
secure the antenna to the pillar at
several locations.
<
• Take the following precautions when
passing the antenna cable inside the front
pillar where the air bag is installed.
- Install the amplifier part of the antenna
cable in front or above the air bag so
that the antenna and the air bag do not
interfere.
Accessory 5
Air bag
Front pillar
- The front pillar cover is secured with
a special clip which may need to be
replaced when the front pillar cover is
removed.
Contact your vehicle dealer for details
on replacing the front pillar cover and
availability of replacement parts.
Clip
Interior part
KDC-BT73DAB only
B59-2186-00_00_13Stepup_QSG_E_En.indd 18 12/12/17 15:06