Playing music (cd/usb/sd/ipod) – Kenwood KDC-BT53U User Manual

Page 6

Advertising
background image

6 | Quick Start Guide

CA-U1EX

[1]

KCA-iP102

[1]

[SRC]

[

1/6]

[

G]

[

E/F] [R/S]

Playing music (CD/USB/SD/iPod)

Playing a disc

Open the Disc slot cover upward.
Insert a disc in the Disc slot.
When it is inserted, the source is
switched automatically and playback
starts.
Close the Disc slot cover.

Playing a USB device/ iPod

Connect a USB device or iPod to the USB
terminal
as shown above.
When it is connected, the source is
switched automatically and playback
starts.
You can connect the iPod or USB device
to either one of the USB terminals
provided at the front and rear of this unit.
If you connect it to the rear USB terminal,
the “REAR USB” indicator stays lit.

[1]

optional accessories

Playing SD card

(KDC-5057SD only)

1

Press the Release button and detach the
Faceplate.

2

Hold the SD card as shown below and
insert it into the SD card slot until it
clicks.

SD card

(commercially available)

3

Reattaching the Faceplate.

4

Press [SRC] to select “SD” source.

Selecting an audio file folder

Press [

R] or [S].

Selecting a song (track or file)

Press [

E] or [F].

Fast-forwarding or fast-
backwarding a song (track or file)

Press and hold [

E] or [F].

Pause and play a song (track or
file)

Press and hold [

1/6].

USB Terminal

REAR USB indicator

Disc slot

Disc slot cover

Release

[Control] knob

B59-2186-00_00_13Stepup_QSG_E_En.indd 6

12/12/17 15:06

Advertising
This manual is related to the following products: