Kenwood DNX520VBT - Manual (Page 50)

50 DNX520VBT
Key Word Voice Registration
Registers the voice to select the Phone number
category by Voice Recognition.
Display the Hands Free Setup screen 1
See <Setting Up the Hands-Free Phone> (page
48).
Display the Key Word List screen 2
Select the Phone number category to 3
register
1 1 1
1 Selects the Phone number category.
"REC" turns on for data with voice for voice
recognition already registered.
[Record] Registers voice for the selected
Phone number category.
Display voice registration screen 4
Say the phone category to register (1st try) 5
Say within 2 seconds after the Beep.
Say the phone category to register (2nd try) 6
Say within 2 seconds after the Beep.
End voice registration 7
⁄
A message is displayed if the voice is not recognized. •
Read the message for the further operation.
Repeat from 1st try if the voice is different from the 1st
•
try.
Hands-Free Phoning
B64-4644-00_00_VW_E_En.indd 50 B64-4644-00_00_VW_E_En.indd 50 09.12.22 2:43:14 PM 09.12.22 2:43:14 PM