Kenwood DNX520VBT - Manual (Page 76)

76 DNX520VBT
Setup Menu
Tuner Setup
You can set Tuner related parameters.
Display the Tuner Setup screen 1
Touch [ ] > [ ] > [TUNER SETUP]. (page
57)
Set each item 2
[NEWS] Sets a news bulletin interrupt time.
( "OFF")
[AF] When station reception is poor,
automatically switches to the station that
is broadcasting the same program over the
same RDS network. (
"ON")
[Regional] Sets whether to switch to the
station only in the specific region using the
"AF" control. (
"ON")
[Auto TP Seek] When traffic information
station reception is poor, automatically
searches for a station that can be received
better. (
"ON")
[Language Select] Selects a display language
for the PTY function.
TV Setup
The TV signal receiving areas can be set.
Display the TV SETUP screen 1
Touch [ ] > [ ] > [TV SETUP]. (page 57)
Set each item 2
[TV1 Area], [TV2 Area] Sets the TV receiving
area. (only when KTC-V300E/KTC-V301E
(optional accessory) connected)
[On Screen TV] Sets an on-screen display of
the TV screen. ( "Auto")
(only when the optional accessory TV tuner
connected)
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
Set up TV 3 (only when KTC-V300E/KTC-
V301E (optional accessory) connected)
Example : TV1 Area screen
Sets the present TV1 or TV2 receiving area.
B64-4644-00_00_VW_E_En.indd 76 B64-4644-00_00_VW_E_En.indd 76 09.12.22 2:43:30 PM 09.12.22 2:43:30 PM