Kenwood KCA-RC107MR - Manual (Page 5)

English
Installation
1 Drill holes on the mounting surface in accordance
with Template (back cover).
2 Install the KCA-RC107MR as shown in the figure
below.
When using the Mounting frame
Surface Mounting (not using mounting frame)
Nut
Lock washer
Mounting surface (Max. board thickness: 18 mm)
Mounting frame
Waterproof rubber
Gasket
KCA-RC107MR
Washer
Mounting bracket
Nut
Lock washer
Mounting surface (Max. board thickness: 26 mm)
Gasket
KCA-RC107MR
Washer
KCA-RC107MR_r1.indb 5 KCA-RC107MR_r1.indb 5 09.2.13 0:32:12 PM 09.2.13 0:32:12 PM