Kenwood KDC-461U User Manual
Page 15
13
ENGLISH |
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
MUTE
P. CONT
ANT.CONT
Wiring connection
Fuse (10 A)
Antenna terminal
Light blue/yellow
(Steering remote
control wire)
To the steering wheel
remote control adapter
Blue/White
(Power control
wire/ Antenna
control wire)
Brown
(Mute control wire)
To the power control
terminal when using the
optional power amplifier,
or to the antenna control
terminal in the vehicle.
To the terminal that is
grounded when either the
telephone rings or during
conversation.
(To connect the Kenwood
navigation system, consult
your navigation manual.)
Yellow (A4)
Red (Ignition wire)
Red (A7)
Yellow (Battery wire)
Pin
Color and function
A4
Yellow
: Battery
A5
Blue/White
: Power control
A7
Red
: Ignition (ACC)
A8
Black
: Earth (ground) connection
B1
Purple ]
: Rear speaker (right)
B2
Purple/black [
B3
Gray ]
: Front speaker (right)
B4
Gray/black [
B5
White ]
: Front speaker (left)
B6
White/black [
B7
Green ]
: Rear speaker (left)
B8
Green/black [
ISO connectors
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring
harness as illustrated below.
Unit
Vehicle
A7 (Red)
Ignition wire
(Red)
A4 (Yellow)
Default wiring
Battery wire
(Yellow)
If no connections are made, do not let the
wire come out from the tab.
Front/rear/subwoofer output
Part list for
installation
(A) Faceplate
(C) Mounting sleeve
(B) Trim plate
(D) Wiring harness
(E) Extraction key
USB cable
JS_KWD_KDC_461U_EWE0_03_EN.indd 13
JS_KWD_KDC_461U_EWE0_03_EN.indd 13
26/12/2013 3:55:16 PM
26/12/2013 3:55:16 PM