Kenwood KDC-BT44U - Manual (Page 13)

11 ENGLISH |
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
VOICE Speak the name of the contact you want to call or use the voice command
to control the phone functions. ( 10, Use Voice Recognition)
BATT* LOW/ MID/ FULL: Shows the strength of the battery.
SIGNAL* NO SIGNAL/ LOW/ MID/ MAX: Shows the strength of the current
received signal.
SETTINGS Default: XX
AUTO ANSWER 1 — 30: The unit answer incoming call automatically in the selected
time. ; OFF: Cancels.
RING MODE SYSTEM: The unit rings to notify you when a call/text message comes in.
(Default ring tone is different according to the paired device.)
• CALL: Selects your preferred ring tone (TONE 1 — 5) for incoming
calls.
• MESSAGE: Selects your preferred ring tone (TONE 1 — 5) for
incoming text messages.
PHONE: The unit uses the connected phones’ ring tone to notify you
when a call/text message comes in. (The connected phone will ring if it
does not support this feature.)
SMS NOTIFY* ON: The unit rings and “SMS RECEIVED” appears to notify you of an
incoming text message. ; OFF: Cancels.
* Functionality depends on the type of the phone used.
Select a contact by name
• You can search through the contacts quickly according to the first letter
(A to Z), number (0 to 9), or symbol.
• The second alphabet of the contact will be searched if the first alphabet
does not exist.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [PHONE BOOK], then press the knob.
3 Turn the volume knob quickly to enter alphabet search mode.
The first menu (ABCDEFGHIJK) appears. To go to the other menu
(LMNOPQRSTUV or WXYZ1 ), press J / K.
Bluetooth mode operations
1 Press to enter Bluetooth mode.
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3 Press and hold to exit.
To return to the previous setting item or hierarchy, press .
CALL HISTORY 1 Press the volume knob to select a name or a phone number.
• “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part
of the display to indicate the previous call status.
• Press DISP SCRL to change the display category (NUMBER or
NAME).
• “NO DATA” appears if there is no recorded call history.
2 Press the volume knob to call.
PHONE BOOK 1 Turn the volume knob to select a name, then press the knob.
2 Turn the volume knob to select a phone number, then press the knob
to call.
• If the phone supports PBAP, the phonebook of the connected phone is
automatically transferred to the unit when pairing. If the phone does
not support PBAP, “TRANSFER PB” appears. Transfer the phonebook
manually. ( 13, TRANSFER PB)
• Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL
• This unit can display only non-accent letters. (Accent letters such as
“Ú” is showns as “U”.)
• If the phonebook contains many contacts, ( Select a contact by
name).
NUMBER DIAL 1 Turn the volume knob to select a number (0 to 9) or character ( , #,
+).
2 Press S / T to move the entry position.
Repeat
steps 1 and 2 until you finish entering the phone number.
3 Press the volume knob to call.
JS_KWD_KDC_BT44U_EWE0_04_EN.indd 11 JS_KWD_KDC_BT44U_EWE0_04_EN.indd 11 26/12/2013 1:44:29 PM 26/12/2013 1:44:29 PM