Kenwood DDX8022BT - Manual (Page 78)

78 DNX8220BT/DDX8022BT
"Full", "Just", "Zoom", "Normal"
; Returns to the "Mode Select 1" screen.
a Selects a screen mode of the rear view
camera (R-CAM) screen.
You can select any of the following screen
mode.
"Full", "Just", "Zoom", "Normal"
s Returns to the "SETUP Menu" screen.
⁄
• When you select the Menu or Navigation, the display is
shown in the full-size display mode automatically. The
screen mode of these displays cannot be changed.
• The picture qua¡lity can be set for each source.
Full picture mode ("Full")
Justify picture mode ("Just")
Zoom picture mode ("Zoom")
Normal picture mode ("Normal")
Security Code Setup
You can set a security code to protect your
receiver system against theft.
⁄
• When the Security Code function is activated, it cannot
be released.
Note that your Security Code is in the 4 digit number
entered in your "Car Audio Passport" in this package.
1 Display the Security Code Setup screen
Touch in the "SETUP
Menu" screen (page 62).
1
2
3
1 Displays the Security code input screen.
2 Turns the SI function on or off.
If turned "On", the burglar alarm lamp
flashes when the vehicle ignition is off.
(
"On")
3 Returns to the original screen.
2 Start Security Code setup
⁄
• If you have already completed the code registration, you
cannot touch [Set].
3 Enter a security Code
Input four-digit number.
Setup Menu
B64-4093-00_00_EN.indb 78 B64-4093-00_00_EN.indb 78 08.2.22 0:50:32 PM 08.2.22 0:50:32 PM