Kenwood DDX8022BT - Manual (Page 86)

86 DNX8220BT/DDX8022BT
Setup Menu
6 Clears the currently memorized settings.
7 Returns to "SETUP Memory" screen.
3 Memorize or recall the settings
When memorizing the Audio Setup and AV
Interface settings:
If settings have already been memorized, a
confirmation message appears. Touch
Yes .
To cancel memorization, touch No .
When recalling the memorized settings:
Touching the screen displays a confirmation
message. Touch
Yes . To cancel recalling,
touch No .
When clearing the currently memorized
settings:
Touching the screen displays a confirmation
message. Touch
Yes . To cancel clearing,
touch No .
4 Quit memorization/recalling of settings
EXT SW Setup
Setting up power specification of the external
device for which the power is controlled from
this unit.
1 Display the EXT SW SETUP screen
Touch in the "SETUP
Menu" screen (page 62).
2 Perform EXT SW Setup
Setting EXT SW Control 1 (EXT SW1)
1
2
3
4
1 Sets the name of the external device. See
<Character Entry> (page 48) for information
on how to enter the name.
2 Sets the power signal output mode.
( EXT SW1: Pulse, EXT SW2: Level)
Pulse: Generates a single power signal
pulse.
Level: Continues output of high power
signal.
Sets to turn output on/off each time the
button on the EXT SW Control screen is
pressed.
3 Sets the Pulse signal output time.
Outputs 500ms when "1" is set. Increases
by 200ms with each step. Up to 100 steps
can be set.
4 Returns to the original screen.
B64-4093-00_00_EN.indb 86 B64-4093-00_00_EN.indb 86 08.2.22 0:50:40 PM 08.2.22 0:50:40 PM