Kenwood DNX9260BT - Manual (Page 79)

DDX series DDX8026BT English 79
Next page 3 Next page 3
Registering Bluetooth Unit Registering Bluetooth Unit
Registers the Bluetooth unit to be
connected.
1 Display the Bluetooth Setup screen
Touch [ ] > > [ ] > > [Bluetooth
SETUP]. (page 68)
2 Display the Connect Device List
screen
3 Search for a Bluetooth unit
1 1 1
1 Displays the registered Bluetooth
units.
[ ] When appears, the text display
is scrolled by touching it.
[Search] Searches for a Bluetooth unit.
[SP DEV] Registers a Bluetooth unit that
cannot be registered by normal register
(paring) operation.
⁄
• A new device cannot be registered if there
are 5 registered Bluetooth units. Delete
unnecessary registration. See <Bluetooth
Unit Connection> (page 81).
4 Display the PIN Code Set screen
1 1 1
1 Display the PIN Code.
[Search] Searches for a Bluetooth unit.
[Cancel] Cancels searching of Bluetooth
unit.
[PIN Code Set] Display the PIN Code
Set screen.
5 Enter PIN code
1 1 1
1 Enters a code number.
[Enter] Enter the PIN code specified for
the Bluetooth unit to register.
This button will not be active until at
least four PIN code digits have been
entered.
[Cancel] Cancels registration of PIN
code.
[Clear] Clears the code number.
B64-4676-00_01_E_English.indd 79 B64-4676-00_01_E_English.indd 79 10/02/05 15:27 10/02/05 15:27