Kenwood AS-iP70 - Manual (Page 25)

25
English
Notes on iPod/iPhone
Usable iPod/iPhone models
Unless otherwise specifi ed, the device called “iPod” in this manual •
refers to the iPod or iPhone unit connected to the iPod applied
part of this unit.
The following iPod/iPhone models can be connected to this unit
•
(as of May 2010).
Made for
iPod touch (2nd generation) •
iPod touch (1st generation) •
iPod nano (5th generation) •
iPod nano (4th generation) •
iPod nano (3rd generation) •
iPod nano (2nd generation) •
iPod nano (1st generation) •
iPod classic •
iPod with video •
iPod (4th generation) •
Phone 3GS •
iPhone 3G •
iPhone •
Disclaimer
The data stored in the SD card/USB device/iPod/iPhone may be •
lost under certain usage conditions of this unit. At Kenwood, we
do not assume any liabilities for the damages incurred by the loss
of stored data.
Transport/Movement Precaution
Perform the following steps before transporting or moving this unit.
1 Press the [OFF] button and remove the external device such as
an SD card, USB device or iPod/iPhone.
2 Wait a few seconds, and then disconnect the AC adapter.
3 Remove the AM loop antenna.
B60-5824-08.indb 25 10.6.8 9:47:52 AM