Usb) terminal, Sd card slot, Ipod/iphone applied part – Kenwood AS-iP70 User Manual

Page 9

Advertising
background image

9

English

USB terminal

SD card slot

Left speaker

(USB) terminal

Connect a USB fl ash memory or a USB Mass Storage-
compatible digital audio player.

Digital audio player, etc.

USB fl ash memory

To disconnect the USB device…

Pull out the USB device after stopping the play.

Recognition may take time with certain devices.

The USB connection mode selection menu may be displayed

with certain devices. In this case, select “Storage mode.”
This unit cannot recognize a USB device through a USB hub, etc.

SD card slot

Insert an SD card containing music or photos into the SD card
slot so that the label side of the card faces downward.

To disconnect the SD card…

Pull out the SD card after stopping the play.

iPod/iPhone applied part

Right speaker

iPod/iPhone applied part

The iPod/iPhone applied part can be ejected by pushing the
case on the right side panel. Attach the dock adapter, which
is provided with iPod/iPhone or commercially available, and
then install iPod/iPhone on the dock adapter.

Dock adapter

To disconnect the dock adapter…

Insert the blade of a fl at-blade screwdriver into the slit
on the dock adapter and lift it.

If iPod/iPhone is connected directly to this unit without using

the dock adapter, the connector may be damaged. Be always
sure to use the dock adapter.
iPod/iPhone cannot be connected together with accessories

such as the cover or case. Be sure to remove the accessories
before connecting.
Insert or remove the iPod gently into/from the dock adapter.

Update the software of your iPod/iPhone to the latest version

before use.
It is required to set the external video output setting of

iPod/iPhone for use with this unit. When iPod/iPhone is
disconnected from this unit, be sure to set iPod/iPhone to the
original setting before playing video on it.

Left side panel

Right side panel

B60-5824-08.indb 9

10.6.8 9:47:19 AM

Advertising