Kenwood CAW1260-02 - Manual (Page 2)

2-DIN 12.301260-02
Remove the dashboard panel at the loca-
tion of the arrows.
Remove the four screws at the location of
the arrows.
Remove the rubber plaid.
Connect all of the needed wiring harnesses and check the connections carefully.
1 2
3
Remove the dashboard panel.
Remove the radio. This is tighten by four
screws at the location of the arrows.
4
5
Place the replacement frame.
6
2-DIN BKX-1260-02 2-DIN CAW-1260-02