Kenwood CAW1170-05 - Manual (Page 2)

Remove the panel around the gear lever.
Remove the screws behind the panel
shown in 3A. This should be removed on
the passenger and driver side. Remove
the panel.
Remove the screws on the location of the
arrows shown in 3.
Remove the screw at the location of the
arrow.
Connect all of the needed wiring harnesses and check the connections carefully.
1 2
3
Remove the original radio panel.
4
2-DIN CAW-1170-05
Place the replacement frame and place
the 2-Din metal bracket.
Use the clips from the original panel to
tighten the replacement panel.
5
Place the headunit and radio trim.
6
3A