Kenwood CAW2275-03 - Manual (Page 2)

Installation Manual Double DIN Kit CAW 2275-03 / CAW 2275-03-RT
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
1. Remove the panel under the
climate control panel.
2. Remove the original bracket, which
is tighten by four screws at the loca-
tion of the arrows.
3. Remove the original plastic
bracket from the metal bracket,
which is tighten by four screws.
The inner plastic panel must be
removed carefully.
(see white line)
4. Place the 4 plastic spacers
in the metal bracket (see arrows).
They must be placed 2 cm
measured from the edges.
5. Mount the metal band beneath
the original bracket.
6. Tighten the headunit onto the
metal band. Various positions are
possible.
Choose the positions which gives
the best result.