Alloy Computer Products GSS-24T2SFP - Manual (Page 21)

21
2.6.2 802.1Q VLAN Port Configuration
Click the Port number to configure the port for 802.1q VLAN.
The following figure shows the 802.1Q VLAN Port Configuration page by port. (e.g. Port10)
You can select an individual port for configuring the 802.1q settings in the following fields:
¾
PVID – enter a valid VLAN ID(1-4094), the PVID must be one of the existing VLAN group ID.
¾ UnTag Frame – Accept or drop incoming untagged frames.
¾ Tag Frame – Accept or drop incoming tagged frames.
Finally, there are 2 buttons to select:
Apply: To submit the port configuration settings to the switch.
Back: To revert back to the 802.1q main setting page without saving.