Alloy Computer Products GSS-24T2SFP - Manual (Page 7)

7
1.2 Configuration Functions for the Switch
After the login is successfully validated, the switch’s home page will display. The left part of the page
provides function menu options (shown as below). Select one of these options to activate to the
individual configuration page.
The function menu contains two parts: Switch for setting up the switch functions and System for
maintaining system parameters.
Switch functions include:
„
Port Status – shows port link status and configuration parameters
„ Port Statistics – shows packet statistics for each port
„ Port-based VLAN – to setup the port-based VLAN
„ 802.1Q VLAN – to configure the tag-based VLAN
„ Trunk – to implement port aggregation features
„ Mirror – to implement port mirroring features
„ QOS – to configure Quality of Service features
„ Rate & Storm Control – to configure traffic limit settings and suppress broadcast storms
System functions include:
„
System Setup – configure system information (such as IP address, etc.)
„ User Management – maintain the login information that enables access to the switch
„ Reboot System – reboot the switch without re-writing default configuration
„ Reset System – reboot the switch after re-writing default configuration
„ Logout – log off the current admin user