Kenwood CAW2300-13-RT - Manual (Page 2)

Installation Manual Double DIN Kit CAW 2300-13 / CAW 2300-13-RT
3. Remove the OEM head unit.
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
1. Remove the upper part of the
silver trim frame
2. Pull up the air vent / harzard
switch unit.
Remove 4 screws of the
OEM Radio.
4. Place the facia plate on the
dashboard.
Push the Metal Frame into the
facia plate.
Connect all required circuit
points and push the double
DIN head unit in the metal
frame until it snaps in.
Place the trim frame.
Reinstall everything in reverse
order to finish installation.
Mount the metal brackets with
the double DIN head unit The position of the copper
coloured holder can be adjusted
to your needs for perfect fit.
(see sample)