Aussie Kanga - Manual (Page 20)

STEP 10-INSTALL BOTTOM BODY PANEL/GREASE TRAY- (ALL MODELS)
•In upright position and drain hole
toward the rear, slide Bottom Body
Panel into guides (See Arrows) at
bottom of Grill Body. Insert two #8 x
1/2” screws through the holes in
guides and Bottom Body Panel; then
tighten. Slide Foil Pan and Grease
Tray all the way into Bottom Body
Panel Brackets.
STEP 11-INSTALL CERAMIC BRIQUETTE TRAYS & GRIDS - (ALL MODELS)
•Remove plastic completely from two Ceramic Briquette Trays. Place side by side on middle shoulder
of front and rear firewall over the Burners.
•Place two Cooking Grids side by side on upper shoulder of front and rear firewall over the Ceramic
Briquette Trays.
#8 X 1/2” SCREW
(2pcs)
BOTTOM BODY PANEL
FOIL PAN
GREASE TRAY
MIDDLE SHOULDER UPPER SHOULDER
GRIDS
CERAMIC
BRIQUETTES
20