Kenwood CAW2143-55 - Manual (Page 2)

All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
1. Unclip the air vents on the left
and right side of the OEM head
unit with a plastic wedge and
remove them.
2. Remove the screws (see arrows)
on the left and right side of the
OEM head unit
Remove the original mounting
frame, the OEM head unit
and the air condition control unit
3. Remove
- the display
- the air condition control unit
- the pocket
from the original mounting frame
4. Mount the brackets to the
Double-DIN Navigation
Place the Double-DIN Navigation
on the dashboard, connect all
required circuit points and fix the
brackets with the original screws.
5. Mount
- the display
- the air condition control unit
- the pocket
to the new facia plate
Connect all required circuit points
and place the new facia plate on
the dash board
Reinstall everything in reverse
order to finish installation.
© 09/2009 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.