Appendix b—specifications, Hardware interface, Lan interface – Teledex Y Series User Manual

Page 20: Adsl, Wlan, Bridge functions, Management, Power supply, Certifications, Packing accessories

Advertising
background image

20

www.teledex.com

Y SERIES EXA100 USER GUIDE

Appendix B—Specifications

Hardware Interface

• Power Jack x 1
• Two Punch IDC Connectors
• Reset Button x 1
• Active LED x 2
• Antenna Internal

LAN Interface

• IEEE 802.3, IEEE 802.3u

ADSL

• ADSL Standard ITU-T G.992.5, ITU-T G.992.3,

ITU-T G.992.1, ANSI T1.413 Issue 2

• G.992.5 (ADSL2+)
• G.992.3 (ADSL2)
• G.DMT

WLAN

• IEEE 802.11n, Backward Compatible with

802.11g/b

• 64, 128-bit Wired Equivalent Privacy (WEP)

Data Encryption

• 11 Channels (US, Canada)/13 Channels

(Europe)/14 Channels (Japan)

• Up to 300 Mbps Data Rate
• WPA / WPA2
• IEEE 802.1x
• RF Operating Frequency: 2.412-2.497 GHz

(2.4 GHz ISM Band)

• ddRF Output Power: 15dBm
• Antenna Gain: 2dBi

Bridge Functions

• IEEE 802.1d
• VLAN Support
• Spanning Tree Algorithm
• IGMP Proxy

Management

• SNMP, Telnet, Web-Based Management,

Configuration Backup and Restoration

• RFC1213 Management Information Base

for Network Management of TCP/IP-Based
Internets: MIB-II

• Software Upgrade via HTTP

Power Supply

• Input: 100 - 240 Vac
• Vac/50-60Hz
• Output: 12 Vdc/1 A

Certifications

• EN 55022 + EN55024
• EN 300328
• EN 301489-1/-17
• EN 60950-1
• Power Saving
• WEEE
• RoHS
• REACH

Packing Accessories

• Module x 3
• Quarter Blank Spec x 2
• KeyStone Jack x 1
• Connector Switch x 1
• QIG for Troubleshooting
• Water-Proof Sealed PE Bag (for ATU-R&QIG)

x 1

NOTE: Specifications are subject to change
without notice.

Advertising