U.S. Products TREADMASTER User Manual
Page 28
TreadMaster Information and Operating Instructions - 22
EN
OPERATION
1. To seat the cleaning brush in the grooves, set the polishing pad holder lift arm in the
"up" position (see Figure 16).
2. Attach the warning sign to the crossbar handle (see Figure 13).
3. Plug in the power cord at the machine receptacle first; then, plug the cord into the
nearest rated outlet.
4. Prior to starting the escalator/moving sidewalk, review Steps 2 – 11 on pages
5. Turn on the TreadMaster’s power switch (see Figure 12).
6. Turn on the escalator and again make sure the direction of travel is away from the
TreadMaster.
For first-time cleaning, U.S. Products recommends that the unit be allowed to run
for 1 hour for optimum results.
Polishing Pad
Holder Lift Arm
Figure 16. Set Lift Arm in Up Position