Videotec AVTPSK - Manual (Page 8)

8
ENGLISH
Vandal resistant camera housing and accessories
The connection for the tamper switch
should be made using a separate
line, without passing through the
standard suppor t circuit. The electrical
specifications for the tamper switch kit
operate at a maximum of 24 V AC 0.5 A. ƽ
TECHNICAL SPECIFICATIONS
Housing
-External dimensions: 390x188x178 mm (AXBXH) / 15.4x7.4x7 in
-Weight:
7 kg (15.5 lb)
-Material: Varnished steel plate, RAL 9002 colour
-Operating temperature:From –20°C to + 50°C
From –4°F to + 122°F
Heater
-Size: 93x45x10,4 mm / 3.7x1.8x0.4 in
-Power supply: 12/24 V AC/DC, 20W or 115/230 V AC, 40W
-Temperature ON: < 15°C +/- 3°C
< 59°F +/- 5°F
-Temperature OFF: > 22°C +/- 3°C
> 72°F +/- 5°F
Tamper switch
-Terminals voltage: 24 V AC max, 0.5 A
Camera power supply
1) (Fig. 6)
-Size:
75,5x50x32,3 mm / 3x2x1.3 in
-Input voltage: 100-240 V AC
-Output voltage: 12 V DC
-Output current: 1A
-Weight: 123 g
2) (Fig. 7)
-Size:
67,2x52,2x40 mm / 2.6x2x1.6 in
-Input voltage: 230 V AC
-Output voltage: 24 V AC
-Output current: 400 mA
-Weight: 380 g
Cable glands
-M20 cable gland: Ø cable 7÷13 mm / 0.3÷0.5 in
-Fixing tork: 7 Nm
Wall or ceiling fixing
-Fixing dist. between centers: 214X67 mm / 8.4x2.6 in (Fig. 11)
MNVCAVTPSKB_0602 25-01-2006 17:39 Pagina 8