Videotec IRHPS - Manual (Page 6)

MNVKIRHPS_1239_EN
The electrical system to which the unit is
connected must be equipped with a bipolar
circuit breaker (Listed). The minimum
distance between the contacts must be
3mm (0.1in). The circuit breaker must be
provided with protection against the fault
current towards the ground (differential)
and the overcurrent (magnetothermal,
maximum 20A).
Make sure that the power source and
connecting cables are suitable for the
power consumption of the system.
The power supply from the mains is to be connected
into terminal J1.
7 Maintaining and cleaning
7.1 Maintaining
Maintenance must be carried out by
personnel trained to operate on electrical
circuits.
7.1.1 Fuses replacement
In case of accidental short circuit or fault to the
outputs, the protection fuse (FUS1) acts .
Should it need to be replaced, the OMEGA Brand, fuse
fitted is the follow:
Model Number: FUS2ATUL
Brand: OMEGA
Models: GT520220
Alternatively, use a T 2A L 250V type fuse.
8 Disposal of waste
materials
This symbol mark and recycle system
are applied only to EU countries and not
applied to the countries in the other area of
the world.
Your product is designed and manufactured with
high quality materials and components which can be
recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be disposed of
separately from your household waste.
Please dispose of this equipment at your local
Community waste collection or Recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
9 Technical data
9.1 Electrical
IRHPS230: IN 230Vac, 50/60Hz, 30W max - OUT 24Vac,
1.2A
IRHPS120: IN 120Vac, 50/60,Hz, 30W max - OUT
24Vac, 1.2A
9.2 Environment
Operating temperature: -50°C / +60°C
9.3 Certifications
IP66/IP67 according to EN60529
EN60598
EN55022, Class B
EN50130-4
10 Technical drawings
The dimensions of the drawings are in
millimetres.
31 110
25
50
30
125
75
31
110
125
Fig. 2 IRHPS.
Headquarters Italy Videotec S.p.A.
Via Friuli, 6 - I-36015 - Schio (VI) Italy
Tel. +39 0445 697411 - Fax +39 0445 697414
Email: [email protected]
www.videotec.com