Videotec TW Serie - Manual (Page 9)

EN - English - I
nstruc
tions manual
7
6.2 Configuration
g When configuring the TWT2A and TWRB2A
models take particular care to prevent
accidental contact between the tool being
used for regulation and the live parts
(230Vac), since the device must be powered
when carrying out the adjustments.
h The configuration procedure makes it
possible to set up the unit for optimum
performance and should only be carried
out by skilled, authorised personnel.
6.2.1 Transmitters
Fig. 01 TWT2A.
Fig. 02 TWT2.
6 Installing and assembling
h Only specialised personnel should be
allowed to install and assemble the device.
6.1 Installation
6.1.1 Connections
h To make the connections just follow
the arrangement given in the table
below which, for each model, shows
the connector to be used according to
the type of device to be connected.
CONNECTIONS TABLE
Model C
amer
a
Monit
or
Twist
ed pair
Po
w
er supply
TWP BNC --- A B ---
TWM2 BNC --- A B AC / DC
TWT2 GND |
VIDEO IN --- A B AC / DC
TWT2A GND |
VIDEO IN --- A B L N
TWRB2 --- GND |
VIDEO
OUT A B AC / DC
TWRR2* --- VIDEO
OUT A B POWER
SUPPLY
TWRB2A --- GND |
VIDEO
OUT A B L N
Tab. 01 * In the TWRR2 receiver the connectors
are on the back of the rack.