AMICA UVKS 16149 DE - Manual (Page 45)

45
1. Take the product out of the package, re-
move the scotch tapes protecting the door
and the equipment. The possibly remaining
adhesive stains may be removed with a mild
washing agent.
2. Do not throw away the polystyrene ele-
ments of the packaging. In the case of the
necessity to transport the fridge, pack it in
the polystyrene elements and film, as well
as protect it with a scotch tape.
3. Clean the interior surface of the fridge and
the elements of the equipment with a wa-
shing agent dissolved in lukewarm water,
then wipe it dry.
4. Place the fridge on an even, flat and stable
surface, in dry, aired and shadowy room,
far from the heat sources such as an oven,
cooktop, central heating radiator, central
heating pipe, hot water installation, etc.
Minimal distances from the heat
sources
- from the electric gas and other ovens
- 30 mm,
- from oil or coal fired ovens - 300
mm,
- from in-built ovens - 50 mm
If there is no possibility to ensure the above-
mentioned distances, provide an appropria-
te insulation board.
INSTALLATION AND OPERATING CONDITIONS OF THE APPLIANCE
Installation before using the applian-
ce for the first time
2
5. Ensure that the product is level by adjusting
the 4 adjustable legs (fig. 2).
The back of the appliance, particu-
larly the condenser and other parts
of the cooling system, must not be
touching other objects which could
damage them, particularly the cen-
tral heating pipe or the water pipe.
Observe minimum clearances and fit
in recess appropriate for the applian-
ce dimensions (installation manual).