Lyndex-Nikken HSK Form A-B-C-D-E-F - Manual

FORM A*:
• Standard type for machining centers and milling machines
• For automatic tool change
• Coolant supply through center via coolant tube
• Drive keys at the end of HSK taper
• Hole for data carrier DIN STD. 69873 in the flange
* except for HSK-A 32 all Form A holders are equipped with side
holes for manual tool change, they can also be used as form C
holders
FORM B:
• For machining centers, milling and turning machines
• With enlarged flange size for rigid machining
• For automatic tool change
• Coolant supply through the flange
• Drive keys at the flange
• Hole for data carrier DIN STD 69873 at the flange
FORM C:
• For transfer lines, special machines and modular tooling systems
• For manual tool change
• Coolant supply through center
• Drive keys at the end of HSK taper