MagTek IPAD99875382 - Manual (Page 18)

IPAD Installation and Operation Manual
12
MOUNTING DIMENSIONS
The overall dimensions of the unit and the mounting hole locations are shown in Figure 3-4.
This drawing is not to scale and dimensions are given in inches. In addition, mounting the IPAD
to a surface will require size # 4-40 screws. The maximum thread depth should not exceed 0.15”.
The torque is 4.75 in lbs ± 20%.
Notes: All dimensions are XX= +/- 0.02 in inches.
Figure 3-4. Mounting Dimensions and Cable Access Hole